Home / Products / Cross Cutting Machine / Coil Unwinding Machine Embossing Machine Cross Cutting Machine Production Line


Recommended Products

Cross Cutting Machine
Embossing Machine
Embossing Roller
Nonferrous Metal
Perforating Machine

Normal FAQs

  • Q Are you a factory or a trading company?

    We are factory with foreign trade department.
  • Q When your company was founded?

    Our company was founded in 2014.
  • Q Do you have any certificates?

    We have passed IS09001 and IS014000.
  • Q What are the maintenance skills of embossing roller?

    It is necessary to clean the embossing roller to protect the pattern, such as removing rust by acid pickling and removing oil stains by organic matter. And you can use sand blasting treatment to increase surface roughness of the embossing roller, it can improve the binding force between the surface pattern and the embossing roller. Finally, the embossing roller should be kept dry to prevent rusting again.
Share to:

Coil Unwinding Machine Embossing Machine Cross Cutting Machine Production Line



1. Unwinding rack: steel plate structure;

2. Unwinding form: suspension brake unwinding;

3. Braking mode: ventilated brake;

4. Unwinding bearing capacity: ≤3T, unwinding inner hole φ 490 ~ 520mm, (paper tube inner core);

5. Unwinding diameter: ≤1000×800mm (raw material);

6. Feeding: hydraulic trolley

Embossing machine:

1. Embossing roller material: forging steel

2. Thickness of pressed material: 0.1-0.2mm

3. Width of pressed material: 620mm

4.Speed: 5-30 m/min(can be adjusted)

5. Pattern: corn kernels pattern

6. Pressed material: stainless steel

7. Pattern depth: 1.0-2.3mm(can be adjusted)

8. Embossing roller specification: ø310*700mm.

9. Roll structure: solid forging;

10. Roll pattern: according to drawing requirements:

11. Roller hardness: HRC45

12. Rack: Steel plate composite structural parts

13. Drive: Speed regulation by frequency conversion

14. Frequency converter brand: Taida

15. Roller heat treatment: roller medium-frequency hardening

16. Center height (ground to the middle of rollers) : 750 mm

17. Electric control part; Independent control cabinet

18. Gap between rollers can be adjusted

19. Roller: removable and changeable roller

Automatic cross cutting machine:

1. Conveying transmission: servo motor

2. Control system: PLC (automatic and precise cutting control)

3. Cutting mode: set the cutting length freely

4. Cutting accuracy: +/-1mm

5. Cutting speed: 5-20m/min

6. Single piece cutting speed: 3 seconds

7. Output counting display: set the required length, when the output reaches, the machine will automatically stop

8. Motor power: 3KW

Contact us
Zhejiang Zhongnuo Intelligent Machinery Co., Ltd. was founded in 2014, It is a National High-Tech Enterprise that is specializing in scientific research, development and manufacturing of various types of metal sheet intelligent embossing machines and forming machines.

Quick Links

Contact Us
  No.217 Linghua Road, Oujiangkou , Wenzhou ,China
  +86-158-5888-6829
  Mr. David
© 2021 Zhejiang Zhongnuo Intelligent Machinery Co., Ltd All rights reserved.  Support by LeadongSitemap   浙ICP备2021035663号-1