English
 |
| Quantity: | |
|---|---|
CHZN
Main technical parameters: small and medium water ripple of embossing machine
1. Embossing roller material: Forged Steel (solid) 40Cr
2. Thickness of pressed material: 0.5-2mm
3. Speed: 6-10m / min
4. Pattern: water ripple
5. Pressed material: stainless steel 201 304
6. Pattern depth: 2-3 mm pattern depth adjustable
8. Specification of embossing roller: ø 410 * 1600mm
9. Width of pressed material: 500-1500mm
10. Roll structure: integral forging
11. Roll surface treatment: chrome plating
12. Roller pattern: CNC engraving according to drawing requirements
13. Rolling mill stand; Steel plate composite structure
14. Rolling mill drive; Variable frequency speed regulation is adopted
15. Embossing method; Reducer pressure regulation
16. Center height (from the ground to two rollers): 750mm
17. Electric control part; Independent control cabinet
18. Between rolls: gap adjustable
19. Knurled roller: removable roller replacement.
20. Cycloidal pin wheel reducer: xwd8-11
21. (DISCO) replace it with hard gear reducer k97-87-7.5kw and replace it with 11
22. Variable frequency motor power: 11kw / 380V (50Hz) 7.5kW motor, brand name changed to 11kw
23. Inverter brand: Delta
24. Three phase asynchronous motor: Nanjing shunbai Motor Co., Ltd
25. Overall dimension of single unit: 3800mm * 1200mm * 1700mm (based on the actual object)
26. Single embossing machine: 6000kg (based on the actual weight)
27. Quantity: 1 set
Main technical parameters: small and medium water ripple of embossing machine
1. Embossing roller material: Forged Steel (solid) 40Cr
2. Thickness of pressed material: 0.5-2mm
3. Speed: 6-10m / min
4. Pattern: water ripple
5. Pressed material: stainless steel 201 304
6. Pattern depth: 2-3 mm pattern depth adjustable
8. Specification of embossing roller: ø 410 * 1600mm
9. Width of pressed material: 500-1500mm
10. Roll structure: integral forging
11. Roll surface treatment: chrome plating
12. Roller pattern: CNC engraving according to drawing requirements
13. Rolling mill stand; Steel plate composite structure
14. Rolling mill drive; Variable frequency speed regulation is adopted
15. Embossing method; Reducer pressure regulation
16. Center height (from the ground to two rollers): 750mm
17. Electric control part; Independent control cabinet
18. Between rolls: gap adjustable
19. Knurled roller: removable roller replacement.
20. Cycloidal pin wheel reducer: xwd8-11
21. (DISCO) replace it with hard gear reducer k97-87-7.5kw and replace it with 11
22. Variable frequency motor power: 11kw / 380V (50Hz) 7.5kW motor, brand name changed to 11kw
23. Inverter brand: Delta
24. Three phase asynchronous motor: Nanjing shunbai Motor Co., Ltd
25. Overall dimension of single unit: 3800mm * 1200mm * 1700mm (based on the actual object)
26. Single embossing machine: 6000kg (based on the actual weight)
27. Quantity: 1 set
